Service Manual

Replacing the graphics card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the graphics card with the PCI-Express card connector on the system board.
2 Place the card in the connector and press down rmly. Ensure that the card is rmly seated.
3 Press and hold the securing tab on the clamp.
4 Push the clamp back towards the bracket.
5 Rotate the PCIE door to close.
60