Service Manual

Removing the memory modules
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Removing the side panels”.
Procedure
1 Lay the chassis on the right side.
2 Locate the memory modules on the system board.
3 Push the securing clip away from the memory module.
4 Remove the memory module from the memory-module slot.
NOTE: Repeat step 2 to step 4 to remove any other memory modules installed in your computer.
56