Service Manual

Main
Discrete Graphics 1 Displays the rst discrete graphics installed on your
computer.
Discrete Graphics 2 Displays the second discrete graphics installed on your
computer.
Discrete Graphics 3 Displays the third discrete graphics installed on your
computer.
Device Information
First HDD Displays the rst HDD device information.
SATA ODD Displays the SATA ODD device information.
Second HDD Displays the second HDD device information.
mSATA Device Displays the mSATA device information.
M.2 PCIe SSD Displays the M.2 PCIe SSD device information.
System Date Displays the current date in mm/dd/yyyy format.
System Time Displays the current time in hh:mm:ss format.
Table 4. System setup options—Advanced menu
Advanced
Advanced BIOS Features
BIOS Recovery via Hard Drive Allows you to store the recovery image le on the primary hard
drive. Default: Enabled.
BIOS Auto-Recovery Enable the user to recover from certain corrupted BIOS
conditions from a recovery le on the user primary hard drive.
Default: Enabled
Always Perform Integrity Check Allows you to perform the Integrity check. Default: Enabled
Integrated Devices
Front USB Ports Allows you to enable or disable the front USB ports. Default:
Disabled.
Rear USB Ports Allows you to enable or disable the rear USB ports. Default:
Disabled.
HD Audio Allows you to enable or disable the integrated audio controller.
Default: Enabled.
Integrated NIC1/Wireless LAN Allows you to enable or disable the NIC1. Default: Enabled.
Integrated NIC2 Allows you to enable or disable the NIC2. Default: Enabled.
Pxe Option Allows you to enable or disable the boot option for legacy
network devices. Default: Disabled.
SATA Operation Allows you to congure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
PCIE GEN3 Allows you to enable or disable the PCIE GEN3. Default:
Enabled.
Power Management Setup
AC Recovery Sets what action the computer takes when power is restored.
Default: Last State.
134