Service Manual
• Access System Setup by pressing F2 key
• Bring up the one-time boot menu by pressing F12 key
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options
are:
• Removable Drive (if available)
• STXXXX Drive
NOTE: XXX denotes the SATA drive number.
• Optical Drive (if available)
• SATA Hard Drive (if available)
• Diagnostics
NOTE: Choosing Diagnostics, will display the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the System Setup screen.
System setup options
NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 3. System setup options—Main menu
Main
BIOS Information
BIOS Version Displays the BIOS version number.
Build Date Displays the BIOS release date.
Product Information
Product Name Displays the product name. Default: Alienware Area-51
R7.
Set Service Tag Allows you to enter the service tag of your computer.
Asset Tag Displays the asset tag of your computer.
EC Information
EC Firmware Version Displays the Embedded Controller rmware version.
Memory Information
Total Memory Displays the total computer memory installed.
Memory Available Displays the amount of memory available on the
computer.
Memory Technology Displays the type of memory technology used.
Memory Speed Displays the memory speed.
CPU Information
Processor Type Displays the processor type
Processor ID Displays the processor identication code.
CPU Speed Displays the CPU speed.
Cache L2 Displays the processor L2 cache size.
Cache L3 Displays the processor L3 cache size.
133