Service Manual

Removing the bottom tron-lighting cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Removing the side panels”.
3 Remove the top fan.
4 Remove the PCI fan.
5 Remove the handle bars.
6 Remove the front bezel.
7 Remove the rear bezel.
8 Remove the base panel.
Procedure
1 Disconnect the bottom tron-lighting cables from the logo board.
2 Open the securing clip which secures the bottom tron-lighting cables to the chassis.
3 Remove the bottom tron-lighting cables from the routing guide on the chassis.
124