Service Manual

Removing the top tron-lighting cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Removing the side panels”.
3 Remove the top fan.
4 Remove the handle bars.
5 Remove the front bezel.
6 Remove the rear bezel.
7 Remove the base panel.
Procedure
1 Disconnect the top tron-lighting cables from the logo board.
2 Remove the top tron-lighting cables from the routing-guides on the chassis.
121