Service Manual

Replacing the PCI fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the PCI-fan with the slots on the chassis and slide the fan
until it snaps into position.
2 Replace the screw (M3x5.25) that secure the PCI fan to the chassis.
3 Connect the PCI-fan cable to the connector on the system board.
Post-requisites
1 Replace the left and right side-panels. See “Replacing the side panels”.
2 Replace the stability foot.
94