Service Manual

Removing the solid-state drive

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your computer.

For more safety best practices, see the Regulatory Compliance home

page at

www.dell.com/regulatory_compliance.

CAUTION: Solid-state drives are fragile. Exercise care when handling the

solid-state drive.

CAUTION: To avoid data loss, do not remove the solid-state drive while

the computer is in sleep or on state.

Prerequisites

1 Remove the stability foot.

2 Remove the left and right side-panels. See “Removing the side panels”.

Procedure

1 Lay the chassis on the right side.