Service Manual

Replacing the memory modules

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your computer.

For more safety best practices, see the Regulatory Compliance home

page at

www.dell.com/regulatory_compliance.

Procedure

1 Align the notch on the bottom of the memory module with the tab on the

memory-module slot.

2 Insert the memory module into the memory-module connector until the

memory module snaps into position and the securing clip locks in place.

NOTE: If you do not hear the click, remove the memory module and

reinstall it.

Post-requisites

1 Replace the left and right side-panels. See “Replacing the side panels”.

2 Replace the stability foot.