Service Manual

Replacing the U.2 fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Align and place the U.2 fan on the hard-drive assembly bracket.
2 Replace the two screws (#6-32x6) that secures the U.2 fan to the hard-drive
assembly.
3 Connect the U.2 fan cable to the fan connector.
Post-requisites
1 Replace the left and right side-panels. See “Replacing the side panels”.
2 Replace the stability foot.
47