Service Manual

Removing the bottom tron-lighting
cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Replacing the side panels”.
3 Remove the top fan.
4 Remove the PCI fan.
5 Remove the handle bars.
6 Remove the front bezel.
7 Remove the rear bezel.
8 Remove the base panel.
Procedure
1 Disconnect the bottom tron-lighting cables from the logo board.
2 Open the securing clip which secures the bottom tron-lighting cables to the
chassis.
146