Service Manual

Replacing the top tron-lighting
cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Align and place the top tron-lighting cables on the chassis.
2 Adhere the tape that secures the top tron-lighting cables to the chassis.
3 Route the top tron-lighting cables through the routing-guides on the chassis.
4 Connect the top tron-lighting cables to the logo board.
Post-requisites
1 Replace the base panel.
2 Replace the rear bezel.
3 Replace the front bezel.
4 Replace the handle bars.
5 Replace the top fan.
6 Replace the left and right side-panels. See “Replacing the side panels”.
7 Replace the stability foot.
145