Service Manual

Removing the top tron-lighting
cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Removing the side panels”.
3 Remove the top fan.
4 Remove the handle bars.
5 Remove the front bezel.
6 Remove the rear bezel.
7 Remove the base panel.
Procedure
1 Disconnect the top tron-lighting cables from the logo board.
143