Service Manual

Removing the rear bezel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Removing the side panels”.
3 Follow the procedure from step 1 to step 3 in Removing the handle bars to
remove the rear handle bar.
Procedure
1 Disconnect the rear I/O accessibility lighting cable from the I/O board.
2 Open the securing clip which secures the rear I/O accessibility lighting cable
to the chassis.
131