Service Manual

Replacing the Memory Module(s)
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After
Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1. Align the notch on the bottom of the memory module with the tab on the memory-module slot.
2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clips
lock in place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
a. memory module
b. memory-module slot
c. notch
Post-requisites
1. Remove both the left and right side-panels. See “Removing the Side Panels”.
2. Replace the stability foot.
45