Service Manual

Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Slide the power-adapter port into the slot on the palm-rest assembly.
2 Using the alignment post, place the power-adapter port bracket on the
power-adapter port.
3 Align the screw hole on the power-adapter port bracket with the screw hole
on the palm-rest assembly.
4 Route the power-adapter port cable through the routing guides on the palm-
rest assembly, and adhere it to the palm-rest assembly.
86