Service Manual

Removing the rear-I/O cover

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your computer.

For more safety best practices, see the Regulatory Compliance home

page at

www.dell.com/regulatory_compliance.

Prerequisites

Remove the base cover.

Procedure

1 Remove the two screws (M2.5x7) that secure the rear-I/O cover to the palm-

rest assembly.

2 Using a plastic scribe, disengage the rear-I/O cover from the computer base

on the proper pry locations.