Service Manual

Advanced
Touchpad Backlight Allows you to configure the touchpad backlight option.
Battery Health Displays the battery health.
Intel Software Guard Extensions Allows you to enable of disable the Intel Software Guard
Extensions
Default: Disabled
BIOS Recovery Enable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive
Default: Enabled
Performance Options
CPU Performance Mode Enables you to select the CPU performance mode.
Default: Enabled
Fan Performance Mode Enables you to select the fan performance mode.
Default: Balanced Mode
Core Over Clocking Level Enable or disable the over-clocking setting and adjust the
processor flex ratio and voltage in the Customization mode.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery Threshold Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Table 5. System setup options—Security menu
Security
Unlock Setup Status Displays if the setup status is unlocked.
Admin Password Status Displays if the administrator password is clear or set.
Default: Not set
System password Status Displays if the system password is clear or set.
Default: Not set
HDD password Status Displays if the HDD password is clear or set.
Default: Not set
Admin Password Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password Allows you to set the system password. The system password
controls access to the computer at boot.
HDD password Allows you to set, change or delete the hard-disk drive
password.
Password Change Allows you to permit or deny system password or HDD
password changes.
Default: Permitted
Computrace Enable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
Firmware TPM Enables you to enable or disable the firmware TPM function.
Default: Enabled
83