Service Manual

Extracción del embellecedor de la pantalla
NOTA: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the
base cover.
2. Remove the wireless card.
3. Remove the solid-state drive.
4. Remove the memory modules.
5. Remove the
rear-I/O cover.
6. Remove the computer base.
7. Remove the display assembly.
Procedimiento
1. Con la punta de los dedos, haga palanca con cuidado en el lado interno del embellecedor de la pantalla.
2. Levante el embellecedor de la pantalla cuidadosamente y déle la vuelta.
3. Desconecte el cable del rastreador ocular tobii de su módulo.
4. Levante el bisel de la pantalla para separarlo del ensamblaje de la pantalla.
62