Service Manual

Table Of Contents

Extracción de la superficie táctil

NOTA: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

base cover.

2. Remove the wireless card.

3. Remove the solid-state drive.

4. Remove the rear-I/O cover.

5. Remove the

computer base.

6. Remove the battery.

Procedure

1. Open the latch and disconnect the touchpad cable from the system board.

2. Open the latches and disconnect the other end of the touchpad cable and the touchpad-buttons cable from the touchpad.

3. Remove the five screws (M2x3) that secure the touchpad bracket to the palm-rest assembly.

4. Lift the touchpad bracket off the palm-rest assembly.