Service Manual

Extracción de la batería
NOTA: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the
base cover.
2. Remove the wireless card.
3. Remove the solid-state drive.
4. Remove the rear-I/O cover.
5. Remove the
computer base.
Procedure
1. Remove the four screws (M2.5x5) that secure the battery to the palm-rest assembly.
2. Lift the battery, along with its cable, off the palm-rest assembly.
51