Service Manual

Extracción de la placa del botón de encendido
NOTA: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the
base cover.
2. Remove the wireless card.
3. Remove the solid-state drive.
4. Remove the memory modules.
5. Remove the
rear-I/O cover.
6. Remove the computer base.
Procedimiento
1. Extraiga los dos tornillos (M2 x 3) que fijan la placa del botón de encendido al ensamblaje del reposamanos.
2. Levante la placa del botón de encendido junto con el cable y extráigalos del ensamblaje del reposamanos.
47