Service Manual

Extracción del ensamblaje del disipador de calor
NOTA: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
NOTA: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
PRECAUCIÓN: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
Prerequisites
1. Remove the
base cover.
2. Remove the
wireless card.
3. Remove the solid-state drive.
4. Remove the memory modules.
5. Remove the rear-I/O cover.
6. Remove the computer base.
Procedimiento
1. Dele la vuelta al ensamblaje de la placa base.
2. Desconecte el cable del ventilador de la placa base.
3. Desconecte el cable del ventilador de la placa base.
NOTA: Para los equipos que incluyen el controlador de gráficos NVIDIA GeForce GTX 1060, extraiga los ventiladores
de la placa base tras desconectar los cables de los ventiladores.
4. Dele la vuelta al ensamblaje de la placa base.
5. Quite los siete tornillos (M2x3) que fijan el ensamblaje del disipador de calor a la placa base.
6. Levante el ensamblaje del disipador de calor para sacarlo de la placa base.
42