Service Manual

Extracción de la placa de E/S
NOTA: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the
base cover.
2. Remove the wireless card.
3. Remove the solid-state drive.
4. Remove the rear-I/O cover.
5. Remove the
computer base.
Procedimiento
1. Retire la cinta que fija el cable de la placa E/S a la placa E/S.
2. Levante el pestillo y desconecte el cable de la placa de E/S de dicha placa.
3. Extraiga los dos tornillos (M2.5 x 5) que fijan la placa de E/S al ensamblaje del reposamanos.
4. Dele la vuelta a la placa E/S.
5. Desconecte el cable del altavoz de tonos graves.
6. Quite la placa de E/S fuera del ensamblaje del reposamanos.
33