Service Manual

Ricollocamento della base del computer
N.B.: Prima di effettuare interventi sui componenti interni del computer, leggere le informazioni sulla sicurezza fornite con
il computer e seguire la procedura in Prima degli interventi sui componenti interni del computer. Dopo gli interventi sui
componenti interni del computer, seguire le istruzioni descritte in Dopo gli interventi sui componenti interni del computer.
Per maggiori informazioni sulle procedure consigliate relative alla sicurezza, consultare la home page Conformità alle
normative su www.dell.com/regulatory_compliance.
Procedure
1. Align the screw holes on the computer base with the screw holes on the palm-rest assembly.
2. Replace the 14 screws (M2.5x8) that secure the computer base to the palm-rest assembly.
3. Replace the two screws (M2.5x5) that secure the computer base to the palm-rest assembly.
4. Connect the tron-light cables to the system board.
5. Route the antenna cables through the routing guides on the computer base.
Post-requisiti
1. Ricollocare il coperchio di I/O posteriore.
2. Ricollocare l'
unità a stato solido.
3. Ricollocare la scheda senza fili.
4. Ricollocare il coperchio della base.
28