Service Manual

Ricollocamento della scheda per reti senza fili
N.B.: Prima di effettuare interventi sui componenti interni del computer, leggere le informazioni sulla sicurezza fornite con
il computer e seguire la procedura in Prima degli interventi sui componenti interni del computer. Dopo gli interventi sui
componenti interni del computer, seguire le istruzioni descritte in Dopo gli interventi sui componenti interni del computer.
Per maggiori informazioni sulle procedure consigliate relative alla sicurezza, consultare la home page Conformità alle
normative su www.dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damaging the wireless card, do not place any cables under it.
1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Slide the wireless card bracket on to the wireless card, and align the screw hole on the wireless-card bracket with the screw hole
on the wireless card and the computer base.
3. Slide the wireless card at an angle into the wireless-card slot.
4. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna cable color
Auxiliary (black triangle) Black
Main (white triangle) White
NOTE: To avoid potential damage to the wireless-card bracket, carefully place it on at an angle on the wireless card
before replacing it.
5. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the computer base.
6. Press the other end of the wireless card and replace the screw (M2x3) that secures the wireless-card bracket to the computer
base.
Post-requisiti
Ricollocare il coperchio della base.
19