Service Manual

Advanced
Intel Software Guard ExtensionsAllows you to enable of disable the Intel Software Guard
Extensions
Default: Disabled
BIOS RecoveryEnable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive
Default: Enabled
Performance Options
CPU Performance ModeEnables you to select the CPU performance mode.
Default: Enabled
Fan Performance ModeEnables you to select the fan performance mode.
Default: Balanced Mode
Core Over Clocking LevelEnable or disable the over-clocking setting and adjust the
processor flex ratio and voltage in the Customization mode.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery ThresholdControl the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Table 5. System setup options—Security menu
Security
Unlock Setup StatusDisplays if the setup status is unlocked.
Admin Password StatusDisplays if the administrator password is clear or set.
Default: Not set
System password StatusDisplays if the system password is clear or set.
Default: Not set
HDD password StatusDisplays if the HDD password is clear or set.
Default: Not set
Admin PasswordAllows you to set the administrator password. The
administrator password controls access to the system setup
utility.
System PasswordAllows you to set the system password. The system password
controls access to the computer at boot.
HDD passwordAllows you to set, change or delete the hard-disk drive
password.
Password ChangeAllows you to permit or deny system password or HDD
password changes.
Default: Permitted
ComputraceEnable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
Firmware TPMEnables you to enable or disable the firmware TPM function.
Default: Enabled
UEFI Capsule Firmware UpdatesEnable or disable BIOS updates through UEFI capsule update
packages.
83