Service Manual

Replacing the display back-cover and antenna

assembly

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Place the display back-cover and antenna assembly on a clean and flat surface.

2. Adhere the display cable, logo-board cable, and camera cable to the display back-cover and antenna assembly.

Post-requisites

1. Replace the

display hinges.

2. Replace the display panel.

3. Replace the

logo board.

4. Replace the camera.

5. Replace the display bezel.

6. Replace the display assembly.

7. Replace the

memory modules.

8. Replace the battery.

9. Replace the computer base.

10.Replace the rear-I/O cover.

11. Replace the solid-state drive.

12. Replace the

wireless card.

13. Replace the base cover.