Service Manual

Replacing the tobii eye-tracker module

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

NOTE: After replacing the Tobii eye-tracker module, launch the EyeX application with internet connection to update the

firmware automatically.

Using the alignment posts, place the tobii eye-tracker module on the display bezel and snap it into place.

Post-requisites

1. Replace the

display assembly.

2. Replace the

computer base.

3. Replace the rear-I/O cover.

4. Replace the memory modules.

5. Replace the solid-state drive.

6. Replace the

wireless card.

7. Replace the base cover.