Service Manual

Removing the display bezel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

base cover.

2. Remove the wireless card.

3. Remove the solid-state drive.

4. Remove the memory modules.

5. Remove the

rear-I/O cover.

6. Remove the computer base.

7. Remove the display assembly.

Procedure

1. Using your fingertips, carefully pry up the inside edges of the display bezel.

2. Carefully lift the display bezel and turn it over.

3. Disconnect the tobii eye-tracker board cable from the tobii eye-tracker module.

4. Lift the display bezel off the display assembly.