Service Manual

8. Disconnect the coin-cell battery cable from the system board.

9. Peel off the tape that secures the coin-cell battery cable to the system board.

10.Disconnect the power-adapter port cable from the system board.

11. Disconnect the speaker cable from the system board.

12. Lift the latch and disconnect the macro-keys backlight cable from the system board.

13. Lift the latch and disconnect the keyboard-backlight cable from the system board.

14. Lift the latch and disconnect the macro-keys cable from the system board.

15.Peel the tape that secures the I/O-board cable to the I/O board.

16.Open the latch and disconnect the I/O-board cable from the I/O board.

17. Open the latch and disconnect the keyboard cable from the system board.

18.Open the latch and disconnect the touch-pad cable from the system board.

19.Remove the screw (M2.5x5) that secures the USB Type-C port bracket to the system board and lift the USB Type-C port bracket

off the system board.

20.Remove the seven screws (M2.5x5) that secure the system-board assembly to the palm-rest assembly.

21. Lift the system-board assembly off the palm-rest assembly.