Service Manual

Replacing the speakers

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Using the alignment posts, place the speakers on the palm-rest assembly.

2. Route the speaker cable through the routing guides on the palm-rest assembly.

3. Connect the speaker cable to the system board.

Post-requisites

1. Replace the

computer base.

2. Replace the rear-I/O cover.

3. Replace the solid-state drive.

4. Replace the

wireless card.

5. Replace the base cover.