Service Manual

Removing the speakers

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

base cover.

2. Remove the wireless card.

3. Remove the solid-state drive.

4. Remove the rear-I/O cover.

5. Remove the

computer base.

Procedure

1. Disconnect the speaker cable from the system board.

2. Remove the speaker cable from the routing guides on the palm-rest assembly.

3. Lift the speakers along with its cable off the palm-rest assembly.