Service Manual

   
:                          .
                 .       
    www.dell.com/regulatory_compliance.
Procedure
1.Align the display panel on the display back-cover.
2.Slide the display cable into the connector on the display panel and close the latch to secure the cable.
3.Adhere the tape that secures the display cable to the display panel.
4.Turn the display panel over and gently place it on the display back-cover and antenna assembly.
5.Replace the four screws (M2x3) that secure the display panel to the display back-cover and antenna assembly.
Post-requisites
1.Replace the logo board.
2.Replace the
display bezel.
3.Replace the
display assembly.
4.Replace the
computer base.
5.Replace the rear-I/O cover.
6.Replace the memory modules.
7.Replace the solid-state drive.
8.Replace the
wireless card.
9.Replace the base cover.
72