Service Manual
: .
.
www.dell.com/regulatory_compliance.
1. .
2. .
3. .
4.
I/O )/ (.
Procedure
1.Note the cable routing and remove the antenna cables from the routing guides on the computer base.
2.Disconnect the tron-light cable from the system board.
3.Disconnect the tron-light cable from the system board.
4.Remove the two screws (M2.5x5) that secure the computer base to the palm-rest assembly.
5.Remove the 14 screws (M2.5x8) that secure the computer base to the palm-rest assembly.
26