Service Manual

Removing the front AlienFX

LED boards

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the base panel.

2 Follow the procedure from step 1 to step 9 in “Removing the palm rest”.

Procedure

1 Disconnect the front AlienFX LED board cables from the front AlienFX

LED boards.

2 Remove the screws that secure the front AlienFX LED boards to the

computer base.