Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel.
2 Remove the wireless card.
3 Follow the procedure from step 1 to step 9 in “Removing the palm rest”.
Procedure
1 Close the display and turn the computer over.
2 Remove the screws that secure the display assembly to the computer
base.
3 Make note of the antenna-cables routing and remove the antenna cables
from the routing guides on the computer base.
57