Service Manual

Security
PPI Bypass for Clear Command Enables you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take eect immediately.
Default: Enabled
UEFI Capsule Firmware Updates Enable or disable BIOS updates through UEFI capsule
update packages.
Default: Enabled
Table 12. System setup options—Boot menu
Boot
Boot List Option Displays the available boot options.
Default: UEFI
File Browser Add Boot Option Enables you to add the boot options.
File Browser Del Boot Option Enables you to delete the boot options
Secure Boot Enable or disable the secure boot feature.
Default: Disabled
Legacy Option ROMs Enable or disable the Legacy Option ROMs.
Default: Disabled
Attempt Legacy Boot Enable or disable Attempt Legacy Boot.
Default: Disabled
Boot Option Priorities Displays the boot sequence.
Boot Option #1 Displays the available rst boot option.
Boot Option #2 Displays the available second boot option.
Boot Option #3 Displays the available third boot option.
Table 13. System setup options—Exit menu
Exit
Save Changes and Reset Allows you to exit system setup and save your changes.
Discard Changes and Reset Allows you to exit system setup and load previous values for
all system setup options.
Restore Defaults Allows you to restore default values for all system setup
options.
Discard Changes Allows you to load previous values for all system setup
options.
Save Changes Allows you to save the changes for all system setup options.
83