Service Manual

Advanced
Default: Disabled
Performance Options
CPU Performance Mode Enables you to select the CPU performance mode.
Default: Enabled
Fan Performance Mode Enables you to select the fan performance mode.
Default: Balanced Mode
Core Over Clocking Level Enable or disable the over-clocking setting and adjust the
processor ex ratio and voltage in the Customization mode.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery Threshold Control the automatic boot ow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Default: 2
SupportAssist OS Recovery Enable or disable SupportAssist OS recovery.
Default: Enabled
Intel(R) Rapid Storage Technology
Non-RAID Physical Disks Displays the disk using the Intel(R) Rapid Storage
Technology.
Table 11. System setup options—Security menu
Security
Unlock Setup Status Displays if the setup status is unlocked.
Admin Password Status Displays if the administrator password is clear or set.
Default: Not set
System Password Status Displays if the system password is clear or set.
Default: Not set
HDD Password Status Displays if the HDD password is clear or set.
Default: Not set
Admin Password Enables you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password Enables you to set the system password. The system
password controls access to the computer at boot.
HDD password Enables you to set, change or delete the hard-disk drive
password.
Password Change Enables you to permit or deny system password or HDD
password changes.
Default: Permitted
Computrace Enable or disable the BIOS module interface of the
optional Computrace Service from Absolute Software.
Default: Activate
Firmware TPM Enables you to enable or disable the rmware TPM
function.
Default: Enabled
82