Service Manual

Advanced
aware operating system, handles USB devices. USB
emulation is always enabled during POST.
Default: Enabled
NOTE: You cannot boot any type of USB device
(oppy, hard drive, or memory key) when this option
is o.
USB Powershare Enables you to charge USB devices when the computer is
turned o or in standby mode.
Default: Enabled
USB Wake Support Enables you to enable the USB devices to wake the
computer from Standby.
Default: Disabled
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Intel Speed Shift Technology Enable/disable Intel Speed Shift Technology support.
Setting this option to enable to allows the operating system
to select the appropriate processor performance
automatically.
Default: Enabled
SATA Operation Enables you to congure the operating mode of the
integrated SATA hard drive controller.
Default: AHCI
Adapter Warnings Enables you to choose if the computer should display
warning messages when you use AC adapters that are not
supported by your computer.
Default: Enabled
Function Key Behavior Enables you to set function key or multimedia key as the
default function key behavior.
Default: Function key
Express Charge Enables you to charge your computer battery using
Standard Charge or Express Charge mode.
Default: Express Charge
Touchpad Backlight Enables you to congure the touchpad backlight option.
Default: Auto
Battery Health Displays the battery health.
Intel(R) Software Guard Extensions Enable or disable Intel Software Guard Extensions.
Default: Software Controlled
Intel(R) Software Guard Extensions allocated memory
size
Displays the allocated memory size for Intel Software Guard
Extensions.
BIOS Recovery from Hard Drive Enable the user to recover from certain corrupted BIOS
conditions from a recovery le on the user primary hard
drive
Default: Enabled
BIOS Auto-Recovery Enable or disable BIOS Auto-Recovery.
Default: Disabled
Always Perform Integrity Check Enable or disable Always Perform Integrity Check.
81