Service Manual

Removing the rear-I/O cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Remove the two screws (M2.5x7) that secure the rear-I/O cover to the palm-rest assembly.
2 Using a plastic scribe, disengage the rear-I/O cover from the computer base on the proper pry locations.
3 Pull the rear-I/O cover from the computer base.
26