Service Manual

Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Lift the ap covering the wireless card to access the wireless-card bracket and screw.
2 Remove the screw (M2x3) that secures the wireless-card bracket to the computer base.
NOTE: To avoid potential damage to the wireless-card bracket, carefully lift it at an angle and remove it from the
wireless card.
3 Lift the wireless-card bracket o the wireless card.
4 Lift the wireless card at an angle, and slide it out of the wireless-card slot.
15