Service Manual

Replacing the camera

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your computer.

For more safety best practices, see the Regulatory Compliance home

page at

www.dell.com/regulatory_compliance.

Procedure

1 Using the alignment posts, adhere the camera module to the display back-

cover and antenna assembly.

2 Connect the camera cable to the camera module.

3 Adhere the tape that secures the camera cable to the camera module.

Post-requisites

1 Replace the display bezel.

2 Replace the display assembly.

3 Replace the system board.

4 Replace the battery.

5 Replace the coin-cell battery.

6 Replace the computer base.

7 Replace the rear-I/O cover.

8 Replace the solid-state drive.

9 Replace the memory modules.

10 Replace the wireless card.

11 Replace the base cover.