Service Manual

Replacing the power-adapter port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your computer.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance.
Procedure
1 Slide the power-adapter port into the slot on the palm-rest assembly.
2 Place the power-adapter port bracket on the power-adapter port.
3 Route the power-adapter port cable through the routing guides on the palm-
rest assembly.
Post-requisites
1 Replace the system board.
2 Replace the battery.
3 Replace the heat-sink assembly.
4 Replace the coin-cell battery.
5 Replace the computer base.
6 Replace the rear-I/O cover.
7 Replace the solid-state drive.
8 Replace the memory modules.
9 Replace the wireless card.
10 Replace the base cover.
62