Reference Guide

0x3c, 0x41, 0x46,
0x4b, 0x50, 0x55,
0x5a, 0x5f, 0x64,
0x69, 0x6e, 0x73,
0x78
Source-USB-Video
0xefbe
0x10
0x0005
0x3fb2
0x1111
0x0001
0xB0
P
Source-USB-Music
0xefbe
0x10
0x0005
0xfe72
0x1111
0x0001
0xB1
P
Source-USB-Phot
o
0xefbe
0x10
0x0005
0xbe73
0x1111
0x0001
0xB2
P
Source-USB-Docu
ment
0xefbe
0x10
0x0005
0x7fb3
0x1111
0x0001
0xB3
P
Source-USB-Setti
ng
0xefbe
0x10
0x0005
0x3e71
0x1111
0x0001
0xB4
P
Source-Network
0xefbe
0x10
0x0005
0xffb1
0x1111
0x0001
0xB5
P
Source-Internal
Memory Video
0xefbe
0x10
0x0005
0xbfb0
0x1111
0x0001
0xB6
P
Source-Internal
Memory Music
0xefbe
0x10
0x0005
0x7e70
0x1111
0x0001
0xB7
P
Source-Internal
Memory Photo
0xefbe
0x10
0x0005
0x3e74
0x1111
0x0001
0xB8
P
Source-Internal
Memory
Document
0xefbe
0x10
0x0005
0xffb4
0x1111
0x0001
0xB9
P
Source-Storage
Mode
0xefbe
0x10
0x0005
0xbfb5
0x1111
0x0001
0xBA
P
System Status
0xefbe
0x10
0x0005
0x7e46
0x1111
0x0001
0xff
0x01: Standby
0x02: Warm Up
0x03: Power On
0x04: Cooling
0x05: Power
Saving
P / S
Note 2: After power on the projector, wait for 5 seconds before sending next
command.
Note 3: The range will depend on VGA input resolution.
Note 4: If sending multiple commands, check that a response has been received
from the projector before sending next command.
Information in this document is subject to change without notice.
© 2017 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
August 2017 Rev. A00