Users Guide

auto shutdown mode. Press any button during the countdown period to stop the auto shutdown mode.
You can also set a different delay period to enter auto shutdown mode. The delay period is the time you
want the projector to wait without an input signal.
You can also set a different delay period to enter auto shutdown mode. The delay period is the time you
want the projector to wait without an input signal.
If an input signal is not detected during the delay period, the projector turns off. To turn on the projector
press the Power button.
Lamp Mode: Allows you to select the Normal or ECO mode.
Normal mode operates at full power level. ECO mode operates at a lower power level which may provide
longer lamp life, quieter operation, and dimmer luminance output on the screen.
Lamp Hour Reset: Press and select the Confirm option to reset the lamp hours.
Power on Beep: Select On to enable the power on beep. Select Silent to disable the power on beep.
Information
The information menu displays the current projector settings.
31