Users Guide

PROJECTOR SETTINGS
Select and press to activate projector settings.
The projector settings menu provides the following options:
Auto Source: Select Off (the default) to lock the current input signal. If you press the Source button when
the Auto Source mode is set to Off, you can manually select the input signal. Select On to auto detect
the available input signals. If you press the Source button when the projector is on, it automatically finds
the next available input signal.
PROJECTOR MODE: Allows you to select the projector mode, depending upon how the projector is
mounted.
Rear Projection-Desktop: The projector reverses the image so that you can project from behind a
translucent screen.
Rear Projection-Ceiling Mount: The projector reverses and turns the image upside down. You can
project from behind a translucent screen with a ceiling-mounted projection.
Front Projection-Desktop: This is the default option.
Front Projection-Ceiling Mount: The projector turns the image upside down for ceiling-mounted
projection.
SPEAKER: Select On to enable the speaker. Select Off to disable the speaker.
TEST PATTERN: Test Pattern is used to test focus and resolution. You can enable or disable the Test
Pattern by selecting Off, Test Pattern 1, or Test Pattern 2.
27