Users Guide

NOTE:

1. If you adjust the settings for Color Temperature, RGB Color Adjust, Saturation, Sharpness, Tint,

and White Intensity the projector automatically switches to Custom mode.

2. Saturation, Sharpness, and Tint only available when the input source is from Composite or S-

Video.

DISPLAY SETTINGS (IN PC MODE)

Select and press to activate display settings. The display settings menu provides the following options:

Horizontal Position: Press to move the image right and to move the image left.

Vertical Position: Press to move the image up and to move the image down.

Frequency: Allows you to change the display data clock frequency to match the frequency of your

computer’s graphics card. If you see a vertical flickering wave, use the Frequency control to minimize the

bars. This is a coarse adjustment.

Tracking: Synchronize the phase of the display signal with the graphic card. If you experience an unstable

or flickering image, use Tracking to correct it. This is a fine adjustment.

Aspect Ratio: Allows you to select the aspect ratio to adjust how the image appears. Options are: Origin,

16:10, 16:9, and 4:3.

• Origin — Select Origin to maintain the aspect ratio of the image projector according to the input

source.

• 16:10 — The input source scales to fit the width of the screen to project a 16:10 screen image.

• 16:9 — The input source scales to fit the width of the screen to project a 16:9 screen image.

• 4:3 — The input source scales to fit the screen and projects a 4:3 image.

Zoom: Press and to zoom and view the image.