Owner's Manual

Overview 9
To set up a Dell AIM configuration:
1
In the Opalis Client, click the Options menu, and select Dell Advanced
Infrastructure Manager
.
The Dell AIM Prerequisite Configuration dialog box is displayed.
2 On the Configurations tab, click Add to begin the configuration setup.
The
Add Configuration dialog box is displayed.
3 In the Name box, enter a name for the connection. For example, the name
of the Dell AIM server or a descriptive name to distinguish the type of
connection.
4 Click the ellipsis button next to the Ty p e box and select Dell AIM .
5 In the AIM Server Location box, type the name or IP Address of the Dell
AIM computer.
6 In the AIM Server Port box, type the port used to access the Dell AIM
Web Service.
7 In the Use SSL box, select Tr u e if Opalis should use SSL to connect to the
Dell AIM server; otherwise select False.
8 In the AIM Username and AIM Password boxes, type the credentials that
Opalis will use to connect to the Dell AIM server.
9 Click OK to close the configuration dialog box, and then click Finish .
NOTE: The Dell AIM configuration type is used by activities, such as Add Persona
and Get Persona, where object type is implicit, and by activities, such as Remove
Object, where inputs properties, filters and returned data are not dependent on
object type selection.
To set up a Dell AIM Object Type configuration:
1
In the Opalis Client, click the Options menu, and select Dell Advanced
Infrastructure Manager
.
The Dell AIM Prerequisite Configuration dialog box is displayed.
2 On the Configurations tab, click Add to begin the configuration setup.
The
Add Configuration dialog box is displayed.
3 In the Name box, enter a name for the connection. That is, the name of
the Dell AIM Controller or a descriptive name to distinguish the type of
connection.
AIMOpalis_bk0.book Page 9 Monday, October 24, 2011 10:16 AM