Owner's Manual

66 Configuring Dell Integration Pack Activities
property Parameter 1 and enter the ID of the persona that you want to lock.
For more information on the parameters required for each AimWS method
refer to the Dell Advanced Infrastructure Manager Developer's Guide.
Configuring the Start Activity
To configure the Start activity:
1
From the Activities pane, drag a Start activity to the active runbook.
2 Double-click the Start activity.
The
Properties dialog box is displayed.
3 Configure the Properties tab:
a In the Configuration section, click the ellipsis button (...), and then
select the Dell AIM configuration that you want to use for this
activity. Click
OK .
b In the Properties section, enter a value for each of the required
properties and the applicable optional properties. If the property is
Lookup-enabled, you can click the ellipsis (…) button next to the text
box to browse for a value.
You can also use returned data to automatically populate the value of the
property from the data output by a previous activity in the workflow.
To use returned data
a Right-click the property value box, click Subscribe , and then click
Returned Data .
b Click the Activity drop-down box and select the activity from which
you want to obtain the data.
c To view additional data elements common across the runbook, select
Show Common Returned Data .
d Click the returned data element you want to use, and then click OK .
For a list of the data elements returned by each activity, see the Returned
Data tables in the activity topic.
AIMOpalis_bk0.book Page 66 Monday, October 24, 2011 10:16 AM